Detailed introduction

Solvent based ink for PVC decorative film, suitable for use in gravure printing machines, with a wide printing speed range of 25-120 meters/minute. The ink has high color strength, good tint power, high light resistance and heat resistance, and is very suitable for special processes of heat lamination.

Common models:

   PVC Varnish

   PVC-A Varnish

   IV-1020 White

   IV-2010 Yellow (Containing heavy metals)

   IV-2020 Yellow (Containing heavy metals)

   IV-2200 Yellow

   IV-3010 Red

   IV-3120 Red

   IV-3130 Red

   IV-3195 Permanent Red (high heat resistance, high bonding strength)

   IV-3395 Sturdy Red (high heat resistance, high bonding strength)

   IV-4080 Process Blue

   Iv-4100 Purple

   IV-6010 Extra Green

   IV-5010 Extra Black

   IV-8010 Silvery

   IV-9010 Green Gold

   IV-9020 Red Gold

   IV02-8030 Pearl Silver White

Printing Conditions:

Printing viscosity: 10-25 seconds Zahn cup 3#,at 25℃

Diluting ratio: Ink: PVC Varnish=1:0.8-1.5

Printing Speed: 25-120M/min

Cylinder:175 lines/inch

Drying speed: ethyl ester for fast drying and butyl ester for slow drying

Heat lamination temperature: below 180℃ (depending on the thickness of the PVC film)

Precautions：

1. The environmental requirements of ink depend on local regulations

     2. The printing speed of ink is easily affected by the addition of solvents afterwards

     3. Avoid adding too many ketones to cause stretching and deformation of the printing film

     4. The temperature and speed of heat lamination should be adjusted according to the thickness of the film